Qidi Plus 4 Tool Head Cover (STEW675 Beacon)

This model is printed using Overture ABS on OrcaSlicer.  I glued a 3mm zinc nut to create a bond with the magnet on the right side of the extruder mount.  On the left, there is a mount that can be accessed through the fan hole that allows you to use the stock screw that STEW675's Beacon3D sensor mount uses.  You will have to screw it in from an angle but it works and is very sturdy afterward.  I did use organic supports for the screw mount.  Thanks for everyone who laid the groundwork for this mod.  STEW6785 and Derek.  The Beacon mod made this printer everything I hoped it could be and designing this cover was a challenging and fun project for me.

UPDATE:  I noticed that the “Unload Filament” macro was colliding with the far side of the x-axis.  You may need to adjust macro to prevent this from happening while still allowing the filament cutter to operate properly.  Here is a copy of my GCODE.

    [gcode_macro M603]

description: Unload filament

gcode:

    {% set hotendtemp = params.S|default(250)|int %}

    {% set accel = printer.toolhead.max_accel|int %}

    _CG28

    M204 S10000

    G1 Y150 F9000

    G1 X300 F9000

    G1 Y20 F9000

    G1 Y5 F3000

    G4 P500

    G1 Y20 F9000

    G1 Y5 F3000

    G4 P500

    G1 Y20 F9000

    G1 X56  F12000

    G1 Y310 F12000

    G1 Y324 F600

    G1 X95  F600

    M106 S0

    M109 S{hotendtemp}

    M118 Heat up complete

    G92 E0

    G1 E5 F50

    G1 E50 F200

    G92 E0

    G1 E-0.8 F200

    G4 P300

    M106 S255

    M104 S{hotendtemp-100}  

    G4 P5000

    G1 Y318 F9000

    G1 Y322 F600

    G1 Y318 F9000

    G1 Y322 F600

    G1 Y308 F30000

    G1 Y324 F600

    M106 S0

    M400

    M204 S{accel}

    M118 Unload finish