Knog OI Bell (S) Mount on GoPro Joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Knog OI Bell (S) using a GoPro-style mount. You'll need an M5x30mm or M5x35.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
This model is a mounting solution for the Knog OI Bell (Small, 22.2mm), allowing you to attach it to any bike equipped with a GoPro-style mount.
I designed this for my Specialized Venge, as its aero handlebars don't have a good place to mount a OI bell.
The model has a 22mm diameter cylinder with an M5 bolt hole, designed to fit into a GoPro mount. It's compatible with the standard 2-tab,3-tab mounts used for bike lights and other accessories.
I used an M5x30mm hex socket bolt for my own setup.
The stock bolt on your GoPro mount may be too short.
You'll likely need to replace it with an M5x30mm or M5x35mm bolt, depending on the specific mount you're using.