Dragon Poseable Action Figure V2.2.5 Kit Card (Dummy 13 joints)

This is a minimalistic model I made in Tinkercad for a poseable dragon. I was inspired by Dragon action figure and Stormcleaver Dragon. If you want to print the parts individually or make changes you can find my V1 Tinkercad files here and here, you can find my V2 files here and here. You can use the Tinkercad models or the assembled dragon file for assembly instructions. Once printed you will need to cut all of the parts out of the kit card and remove any supports. 

Print Settings

• Layer Height: 0.1-0.15mm
• Material: PETG or ABS
• Nozzle size: 0.4mm
• Print Speed: 50-100mm/s
• supports: Yes.
• Brim: No (if printing the kit card), yes (if printing individual parts).
• Perimeter generator:  Arachne.
• Printer: Most printers should work.

Notes

• The front talons should not have supports on them.
• The back leg part that connects the leg to the body needs to be glued or plastic welded to the body.
• The V1 cover photo was provided by @3Dprintfun! Please go check out his models!

Goals!

These are some goals I would like to reach, Once I reach the goal, I will start designing whatever the prize is and add it to my model! Then I will release the what the next goal's prize will be. If you want to help get this model to its goal, tell other people about it!

• 30 downloads: variations of the front shoulder-wing connection part for 0 and 4 wings. (Done)
• 50 downloads: Multiple different tail spikes. (Done)
• 100 downloads: Dummy 13 Wings. (In production. (it could take awhile))
• 150 downloads: Spines/ridges. (In production. (it could take awhile))

   Update history

• 8/15/2025-Added V2 files. (less supports, stronger wing joint)
• 8/17/2025-Tested V2 and added photos.
• 8/17/2025-Added goals.

If you have any questions just comment them or private message me!