1 / 2
Indoor temperature, humidity, pressure sensor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple sensor for warehouse, office or other room. Indoor use only.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
How to use
The device measures temperature, humidity and pressure and sends data to the server for analysis.
This software can be adjusted to the needs: LaskaKit/Weather_Station_Mini
Bill of materials
| Item | Model |
|---|---|
| ESP32 Development Board | LaskaKit Meteo Mini | LaskaKit |
| Sensor BME280 | LaskaKit BME280 Air pressure, temperature and humidity sensor | LaskaKit |
| Battery | GeB LiPol Battery 603048 900mAh 3.7V JST-PH 2.0 | LaskaKit |
| Cable | μŠup, STEMMA QT, Qwiic JST-SH 4-pin cable - 10cm | LaskaKit |
| Bolts | DIN912 6xM2,5x5, 2xM3x10 |
Manufacturing instructions:
- Material: PLA
- 3D Printer: FDM 3D printer, average print time 4 hours
- Slicer settings: 0.2mm layer height, 5 perimeters, no supports
- Post processing instructions:
- Insert the battery, use the double sided adhesive tape to fix.
- Insert the ESP32 board and connect to the battery.
- Run the BME280 sensor cable through the space in between the chambers and connect the BME280 sensor.
- Use M2,5 bolts to attach the board and sensor.
- Cover the electronics with the lid and tighten with two M3 bolts.
- Place on the shelf, table or other horizontal surface oriented as shown on the lid.
- Flash the software and flash.