6mm Bolt thread cap for Percubo drum kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some bolts are exposed on my daughter's drum kit. I made these caps and the wrench to protect her from getting scratched
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After replacing the drumheads on my daughter's Percubo drum kit, several bolts became exposed.
This created two risks: potential scratches during use, and thread could damage to other components when storing the kit.
To solve this, I designed these protective caps. They require a custom wrench for tightening (included in the model files).
The model was dimensioned to fit on 6mm bolts.
Print setting:
Nozzle diameter: 0,6mm
Layer height: 0,3mm
Perimeters: 2
Solid Layers: 4 top and 4 bottom.
No supports needed.