Handlebar Mount for Garmin Devices or Compatibles - long

Object description

Handlebar Mount for Garmin Devices or Compatibles.

The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be printed with flex-material.

The main part “Garmin Device Holder_V30mm_long” is similar size to "Garmin Edge® Aero Holder, Art.-No.: 010-13152-00".  In the folder “Optional Parts” you can find three alternative designs. A attached dimensional sketch shows the differences.

If you need the overhang in the other direction, mirror the main part in the slicer along the X- or Y-axis.

All models have a predefined supports.

For best strength, please print the parts in the recommended and predefined direction.

If you are looking for a short version, look here: Garmin short mount

Update 2025-09-07:

Even longer version 30 mm x 100 mm added on request (Version 30mm_long but 100mm instead of 80mm). For a short Magicshine MJ 900S headlight, which would otherwise have shone into the Bowden cables with a shorter handlebar mount length.

Update 2025-08-15:

Segmented adapter dia. 35,9mm to dia. 31,9mm added for those who don't have flex material. You need two of them.

Bought parts:

3x Thread insert M3

1x Hexagon nut M3

2x Hexagon socket screw M3x8

1x Hexagon socket screw M3x10

1x Hexagon socket screw M3x14

Assembly instructions:

See attached picture.

Melt in the threaded inserts flush or slightly recessed.

Secure all screws with a drop of threadlocker.

Suggested print settings:

Material:  ABS/ASA, PETG

Resolution: 0,2mm

Infill: 30%

Perimeter: 4

Support: yes, predefined