1 / 3
NodeMCU 32s Presence Sensor Case with LD2450 mmWave
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case to make a presence sensor with an ESP32 NodeMCU32s and an LD2450 mmWave sensor.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Case to make a presence sensor with an ESP32 NodeMCU32s and an LD2450 mmWave sensor, the lid also has holes to glue 9x3mm neodymium magnets. The ESP32 and LD2450 should not require any glue and should stay in place once the lid is screwed on.
BOM:
- NodeMCU 32s: https://www.amazon.com/3PCS-ESP-32S-ESP-WROOM-32-Development-Microcontroller/dp/B0D8S22V7L?crid=OD3GJ0PEYVKC&sprefix=nodemcu%2Caps%2C125&sr=8-3&th=1
- LD2450: https://www.amazon.com/ZORZA-High-Precision-HLK-LD2450-Detection-Operation/dp/B0D46LY4P8?crid=QJPXYQ1E678F&sprefix=ld2450%2Caps%2C115&sr=8-4
- 3 9x3mm Circular Magnets
- 2 M3 heatset inserts
- 2 M3x4 SHCS Screws