1 / 3
NodeMCU 32s Presence Sensor Case with LD2450 mmWave
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case to make a presence sensor with an ESP32 NodeMCU32s and an LD2450 mmWave sensor.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 74
- Makes
- 0
- Views
- 710
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Case to make a presence sensor with an ESP32 NodeMCU32s and an LD2450 mmWave sensor, the lid also has holes to glue 9x3mm neodymium magnets. The ESP32 and LD2450 should not require any glue and should stay in place once the lid is screwed on.
BOM:
- NodeMCU 32s: https://www.amazon.com/3PCS-ESP-32S-ESP-WROOM-32-Development-Microcontroller/dp/B0D8S22V7L?crid=OD3GJ0PEYVKC&sprefix=nodemcu%2Caps%2C125&sr=8-3&th=1
- LD2450: https://www.amazon.com/ZORZA-High-Precision-HLK-LD2450-Detection-Operation/dp/B0D46LY4P8?crid=QJPXYQ1E678F&sprefix=ld2450%2Caps%2C115&sr=8-4
- 3 9x3mm Circular Magnets
- 2 M3 heatset inserts
- 2 M3x4 SHCS Screws