Simracing keyboard holder for cockpit / simrig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple keyboard holder, enables you to put keyboard aside when you are racing. Adjusted for V-slot profiles.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
BACKGROUND
Had no place to put keyboard, so designed a holder that slides into v-slot. Works just fine. Tested and adjusted for Omega V-slot profiles, but as profiles are standardized, it should fit any V-slot.
CONTENT
Design consists of three elements:
- Holder housing
- Vertical limiter to prevent holder from sliding down along v-slot if it would be loose. You can adjust length with openings in main housing
- Horizontal limiter which prevents keyboard from slipping out from holder. Also adjustable, so it should any keyboard size.
PRINTING INFO
I printed it with PETG as allows for some elastic deformation and I advise to use similar materials that enable design to “work” - PETG, PCTG, ABS etc. PLA may work as well, but I would not recommend it.
Please bear in mind, that limiters are thing and long elements, so you may need to print with brim, to prevent adhesion and warping issues.
All models provided in printing orientation.