1 / 6
Bike Water Bottle Holder Strong, Fast Print, and Versatile — zdjęcie 1
1 / 6

Bike Water Bottle Holder Strong, Fast Print, and Versatile

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Optimized geometry to be strong, flexible, print fast, and fit lots of different containers

Ocena
5 / 5
Polubienia
22
Pobrania
79
Wydruki
1
Wyświetlenia
418
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction:

Hoop / ring-style bottle holder designed to flex and securely grip a wide range of bottles and beverage containers (approx. 70 mm to 100 mm in diameter). The independent rings adjust to hold tapered containers just as firmly. Compact at 145 mm overall length, yet versatile and lightweight at just under 30g.

Print Settings:

  •     Nozzle: 0.4 mm
  •     Layer Height: 0.28 mm
  •     Supports: No
  •     Material: PETG
  •     Infill: 15% Gyroid
  •     Perimeters: 4

Assembly:

I placed the angled side of the hoops / rings to face where a bottle will enter to make it easier to expand the rings. Uses the M5 mounting bolts to hold the assembly together. May need longer bolts as I increased the height by 2 mm depending on your setup.

Change Log:

  •     v1.0 - 08/18/2025
    • Initial Release

Tagi