Airtekk Air Suspension Controller (Dash Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetized dash mount for airtekk controllers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was inspired to make this when a friend recently expressed a need to mount his airtekk air controller in his LS400. So I made this kit to accommodate him, and I liked the design so much, I decide to post it up here.
There are several different mounting systems, including a short and tall swivel mount, and a hingless dash mount with a either a 45 or 30 degree angle.
The tray is printed in abs at 15% infill, the mounts are printed in abs at 45% infill. I'd recommend using ABS, ASA, PETG-CF or PET-CF.
The hardware for this model are: 18x 8x3mm round magnets
If you decide to use the swivel, it utilizes 1x M3x12mm bolt with nut & washer.
Link for magnets: https://www.amazon.com/dp/B0B2PJV38X?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2