Airtekk Air Suspension Controller (Dash Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetized dash mount for airtekk controllers.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 65
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was inspired to make this when a friend recently expressed a need to mount his airtekk air controller in his LS400. So I made this kit to accommodate him, and I liked the design so much, I decide to post it up here.
There are several different mounting systems, including a short and tall swivel mount, and a hingless dash mount with a either a 45 or 30 degree angle.
The tray is printed in abs at 15% infill, the mounts are printed in abs at 45% infill. I'd recommend using ABS, ASA, PETG-CF or PET-CF.
The hardware for this model are: 18x 8x3mm round magnets
If you decide to use the swivel, it utilizes 1x M3x12mm bolt with nut & washer.
Link for magnets: https://www.amazon.com/dp/B0B2PJV38X?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2