JOREST Watch press set for repairing watches Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for Watch press set for repairing watches
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — NoDerivatives
Welcome, and thank you for choosing my model.
I will provide some context for this model.
I created this model to store the Watch Repair Kit I purchased on Amazon. I chose for two smaller boxes instead of one large box because it is easier to store.
You can easily print it in PLA, as I did, but it can actually be printed in any material. However, I strongly advise not using TPU.
To make these boxes, you will need 16 magnets measuring 6x3mm.
If the press does not fit the first time, you can loosen the Allen bolts a quarter turn and it should fit perfectly.
Below you can find all the STL files, or you can choose to use my pre-sliced file.
Happy printing!
