Wera Allen Key Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Peg board mountable Wera allen wrench holder. Easy to use and bike shop tested.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- GNU General Public License v2.0
This is a custom Wera Allen key (hex key) holder designed for pegboards. At the shop I worked at, we had a full set of Wera Allen keys, but the stock rubber holder was always frustrating to use. Inspired by Park Tool’s Allen key holder, I designed this model to provide easy access, quick storage, and a cleaner workshop setup.
I printed this using Bambu Lab PLA, though you may want to use a tougher material (like PETG or ABS) for the pegboard pins, since PLA can be brittle and may snap. I’ve included my own pin design based on the Park Tool version, but a trip to your local hardware store for stronger pins could be worthwhile.
For assembly, I used M3 screws (link here: https://www.amazon.com/dp/B07VNDFYNQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1)
Anyway, make sure to leave a like if it works for you and leave any suggestions 👍. Hope this makes your life easier!