1 / 2
2008-2010 Ford F-250 Vent Gauge Pod — zdjęcie 1
1 / 2

2008-2010 Ford F-250 Vent Gauge Pod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vent replacement gauge pod. Accepts 52mm gauges.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is just a simple gauge pod I threw together because I wanted a different look. Installation requires the removal of the vent louvers, sorry you won't be able to steer the air anymore. like I said, it's simple so no top or bottom layers, and honeycomb infill to allow air to flow around the perimeter. I printed mine in Siraya Tech PAHT-CF then clear coated it; I'm sure it'd work just as well (less inhaled carbon fibers) in a filament like ABS or anything that can withstand summer heat.

Printed by author on X1C (resistor mod, revo 0.6 ruby nozzle, G10 Build Platform, Heated Chamber)

0.42 Layer

3 Walls

0 Top Shell

0 Bottom Shell

7% Honeycomb Infill

No Support

.3mf has a toroidal modifier to increase infill around the lower perimeter. This area is obstructed when the vent/gauge pod is reassembled, so I wanted to add back in some material here, probably unnecessary. 

This may fit other ford models, I'm not sure. It has only been tested and used on a 2008 F-250 PSD.

Tagi