2008-2010 Ford F-250 Vent Gauge Pod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vent replacement gauge pod. Accepts 52mm gauges.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just a simple gauge pod I threw together because I wanted a different look. Installation requires the removal of the vent louvers, sorry you won't be able to steer the air anymore. like I said, it's simple so no top or bottom layers, and honeycomb infill to allow air to flow around the perimeter. I printed mine in Siraya Tech PAHT-CF then clear coated it; I'm sure it'd work just as well (less inhaled carbon fibers) in a filament like ABS or anything that can withstand summer heat.
Printed by author on X1C (resistor mod, revo 0.6 ruby nozzle, G10 Build Platform, Heated Chamber)
0.42 Layer
3 Walls
0 Top Shell
0 Bottom Shell
7% Honeycomb Infill
No Support
.3mf has a toroidal modifier to increase infill around the lower perimeter. This area is obstructed when the vent/gauge pod is reassembled, so I wanted to add back in some material here, probably unnecessary.
This may fit other ford models, I'm not sure. It has only been tested and used on a 2008 F-250 PSD.