1 / 1
Gurtablutscher
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Device to easy release small smt parts from their feeding belts without having them flying around all over the place
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1
Device to easy release small smt parts from their feeding belts without having them flying around all over the place. It's based on my SMD Boxes.
Open the lid and feed the belt through beneath the lid, parts facing down. Thread the covering plastic strip through the bottom hole, close the lid up and pull the covering. The strip will feed through by pulling on the cover and the parts will fall down by gravity. Don't pull to fast, othetwise parts could fly out the left side.