Topeaks MTX Quicktrack Snap In Spare Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare Part for the Snap-In Part of bags supporting the Topeaks MTX Quicktrack System
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 2
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Since I tend to break the snap-in part of the bag on my montainbike, I decided to design a spare part by myself. This is a spare part for the Topeak MTX Quicktrack system supporting a lot of bags.
Usually the hook breaks when you are in a hurry and use too much force. Without hook the bag does not hold anymore in the Quicktrack system and tends to just fall of the bike.
The snap in has same dimensions and can simply be replaced. The defect part can be unscrewed, the replacement then has to be screwed in (take care for the spring!).
Print settings:
Just use 40% infill and your standard settings. I use ABS as material to be more resistant to environmental influences.
If you like my work, you can buy me a coffee:
https://paypal.me/rincewind76/1
So I can stay awake longer to make more designs (or fix the existing ones…)