22 modeli
Modified the sled openscad file from jridley's design so that instead of using nuts and bolts, I could drill out holes for zipties (sort of like this approach https://www.youtube.com/watch?v=MvBx_74FzUk ). I haven't looked at jridley's…
Inspired from Woodpeckers MTXL Center Gauge I designed some gauge bars in metric and imperial sizes, ask if you want some other sizes : Imperial : 5/8, 3/4, 1, 1-1/4, 1-1/2 inch Metric : 15, 20, 25, 30, 35, 40 mm You need : 2x Bottom.stl…
Inspired from Woodpeckers MTXL Center Gauge See also the smaller version : MT Center Gauge I designed some gauge bars in metric and imperial sizes, ask if you want some other sizes : Imperial : 5/8, 3/4, 1, 1-1/4, 1-1/2 inch Metric : 15,…
Honda MTX50 year 1983 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
This allows a MTX bag to be attached to a MIK rack. Requires 4x M5-25mm screws and nuts to assemble. I printed in ASA, and it appears to be holding up perfectly well after about 1,000 miles of commuting.
The rear skid plate is easy to print as it can be printed upside down. Added larger variant of the rear skid plate. The front skid plate also printed nicely on my MINI+, without any supports. Mudguards are also easy to print. I took…
This spacer allows you to mount standard side bags on your rack. Print with No Support PLA
A bolt-on platform for Rad Power Bikes bike rack to accept Topeak MTX bags. Print vertically for best part strength, glue the two parts together. 0.2mm resolution PCTG is what I printed with. Choose a filament that is strong and…
I used it to attach an Abus lock to MTX rail.
Print in PETG with 3 walls or more. Should fit many other rear lights with standard mounting. Should fit other Topeak bike racks as well. Secure with two 5mm bolts with nut and washer.
This mount allows you to install a JBL BassPro Nano subwoofer and a Midland MXT 275 (maybe other MXT models as well) under the center console of a 2002 Jeep TJ/Wrangler. Subwoofer:…
Coin with hidden coordinates for solving a mystery cache
Have a older Topeak MTX1.0 rack but want to use a MTX2.0 accessory? This adapter plate lets you use MTX2.0 on older racks. Older 1.0 racks have a ramp that don't allow the MTX2.0 latch to stay latched. This adds a flat surface so MTX2.0…
Since I tend to break the snap-in part of the bag on my montainbike, I decided to design a spare part by myself. This is a spare part for the Topeak MTX Quicktrack system supporting a lot of bags. Usually the hook breaks when you are in a…
Boardman MTX8.8 Bike Lock Holder When I bought my bike and the D-lock from Halfords I found that I couldn't fit the D-Lock on the frame of my bike. With some filament and some 3D printing, I came up with this simple clip that can be…
This mount lets you attach a saddle-post taillight onto the back of a QuickTrack MTX 2.0 rear bike rack. It includes a mini-fender that serves as a flange to prevent the taillight from slipping off, and the fender also protects the…
Black plastic holder for red reflector for Topeak MTX Beamrack bike carrier. Černý plastový držák červené odrazky na cyklonosič Topeak MTX Beamrack.
MST MTX-1 light bar mount for a dilwe mini light bar. It mounts to and is protected by the chassis frame. You need to print 2 pcs. Also you need 2 M2x8mm countersunk screws and the 2 aluminium spacers from the light bar
pin_top_v12.stl has a captive nut. You must pause the print after the captive part has printed and install a M4 nut. I wanted a plate for my topeak mtx rack that I could bolt custom experiments on but still remove easily. 2020 seemed like…
Have a older Topeak MTX1.0 rack but want to use a MTX2.0 accessory? This adapter plate lets you use MTX2.0 on older racks. Older 1.0 racks have a ramp that don't allow the MTX2.0 latch to stay latched. This adds a flat surface so MTX2.0…
MST MTX-1 light bar mount for a dilwe mini light bar. It mounts to and is protected by the chassis frame. You need to print 2 pcs. Also you need 2 M2x8mm countersunk screws and the 2 aluminium spacers from the light bar
Printed PLA with 25% infil and a few extra base layers. Not really sure that is required though, as it seems quite stable already. Needs supports to print, but they are minimal. Roughly 38g filament and 55min print time.
