Volvo B230 TPS adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A TPS adapter for the stock 8v Throttle Body, for use with a Potentiometer based TPS, during aftermarket ECU use
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another TPS adapter among many, I came up with this for a minimal solution instead of the bulky ones out there.
This does however require you to both shorten the throttle body butterfly axle/rod by the required amount your particular TPS needs.
Also as with most TPS sensors I know, one needs to cut the “half moon”/D-shaped end that goes into the TPS, to have a 2.5mm removed from each side. Unless your TPS accomodates a D-shaped rod that is.
So it becomes a I shape or T shape, depending on how you look at things