1 / 3
Fiizreal X50 - Multiboard / Multiconnect mount — zdjęcie 1
1 / 3

Fiizreal X50 - Multiboard / Multiconnect mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fiizreal X50 Brushless Turbo Fan and Fiizreal X50 Vacuum Add-on mount for Multiboard

Ocena
0 / 5
Polubienia
4
Pobrania
35
Wydruki
0
Wyświetlenia
336
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This project includes two models designed for the Fiizreal X50 Brushless Turbo Fan:

Fiizreal X50 Multiboard Mount – attaches the fan to a Multiboard using the Multiconnect system.

Fiizreal X50 Vacuum Add-on Mount – a dedicated mount for holding additional vacuum accessories on the Multiboard.

Printing Tips

For the fan mount, you can insert 6×2 mm magnets (same as for gridfinity) to improve the connection and make attaching much more satisfying.
→ Pause the print at layer 20 and place the magnets inside before continuing.

To attach to the Multiboard, make sure to use the Multiconnect system.

Recommended Print Settings (Multiboard defaults)

Nozzle: 0.4 mm

Walls: 3 perimeters

Layer height: 0.2 mm

Infill: 15%

Supports: No supports needed

Material: PLA or PETG is sufficient

Tagi