1 / 3
Fiizreal X50 - Multiboard / Multiconnect mount — image 1
1 / 3

Fiizreal X50 - Multiboard / Multiconnect mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fiizreal X50 Brushless Turbo Fan and Fiizreal X50 Vacuum Add-on mount for Multiboard

Rating
0 / 5
Likes
4
Downloads
35
Makes
0
Views
336
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

This project includes two models designed for the Fiizreal X50 Brushless Turbo Fan:

Fiizreal X50 Multiboard Mount – attaches the fan to a Multiboard using the Multiconnect system.

Fiizreal X50 Vacuum Add-on Mount – a dedicated mount for holding additional vacuum accessories on the Multiboard.

Printing Tips

For the fan mount, you can insert 6×2 mm magnets (same as for gridfinity) to improve the connection and make attaching much more satisfying.
→ Pause the print at layer 20 and place the magnets inside before continuing.

To attach to the Multiboard, make sure to use the Multiconnect system.

Recommended Print Settings (Multiboard defaults)

Nozzle: 0.4 mm

Walls: 3 perimeters

Layer height: 0.2 mm

Infill: 15%

Supports: No supports needed

Material: PLA or PETG is sufficient

Tags