AMS Lite Feeder Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This snaps onto the back of the AMS Lite feeder mechanism and allows a standard 4mm PTFE tube to be inserted.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No special print instructions. PLA is just fine. I printed my final products for my setup with my 0.2mm hotend since I have it, but the prototypes I printed with 0.4mm were perfectly serviceable.
INSTALLATION NOTE: This is meant to be a very snug fit. The detent will make an obvious click when it latches. If you didn't hear/feel the click keep going.
I recently grabbed a 4-spool drybox and wanted to incorporate it with my setup. I saw mkd's adapter and gave it a try in both TPU and PLA but it didn't stay attached to the feeder. After several iterations I found a design that works great for me, so I wanted to share it. Fusion360 export included if anyone wants/needs to adjust it.