1 / 3
Adapter – bike bottle cage to seatpost (Ø27.2 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts a standard bicycle water bottle cage directly to the seatpost (Ø27.2 mm).
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Adapter – bike bottle cage to seatpost (Ø27.2 mm)
Mounts a standard bicycle water bottle cage directly to the seatpost.
Bottle is placed at a 31° angle + your bike seatpost frame angle.
Included 3D printed parts
BottleCageSeatPostMount_V2.0– 1×BottleCageSeatPostMount-Adapter_V2.1– 1×BottleCageSeatPostMount_AntyLej_V2.0– 1× (optional, bright green in preview)
Additional hardware (not printed)
- M4×20 screw, ISO 7380 MF A2 – 4×
- M4 self-locking nut, DIN 985 A2 – 4×
- M5 self-locking nut, DIN 985 A2 – 2×
- M5x10 (or longer) screw any type compatible with your bottle cage- 2x
Testing & observations
Issue 1 – bottle cage opening
- First tested with an old bottle cage – vibrations caused the cage to bend and open, making the bottle loose.
- Switched to Kellys SQUAD cage: worked fine on smooth terrain, but during rough/aggressive riding (roots, uneven surface, high impacts), the cage still tended to open up and loosen the bottle.
This seems related to the high mounting angle and load direction pulling the cage outward. So far sturdy bottle cage is partial solution.
Issue 2 – screws loosening
- Initial tests showed screws undoing due to vibration.
Fixed by using self-locking nuts + blue Loctite for extra security.
Conclusion
- Adapter works reliably on smooth roads and light off-road with a sturdy cage (e.g., Kellys SQUAD).
- In aggressive off-road riding, cages tend to open under cyclic impacts, making the bottle less secure.
- Future design improvements are possible if there is enough interest.
Print settings:
- Material: Prusament PETG
- Layer Height: 0.15 mm
- Perimeters: 4
- Infill: 15%
- Print orientation on preview