Dice Holders for Chessex dice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic dice holders for 12mm and 16mm Chessex dice. Plus an assorted holder with an additional slot for a d20.
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
Dice Holders!
On my printer, the lid is pretty snug for the first few fittings, but after a couple it snaps into place nicely while being easy to remove. Magnets can be press fit.
Printing
All items can be printed in their default orientation without supports. 3mf files are provided with example settings. I used:
- Layer height: .2mm
- Nozzle: .4mm
- Material: PLA
- Perimeters: 2 or 3 depending on sturdiness. I think 2 is fine.
- Infill: 10% cubic
Consumables
- 6x 4mm x 2mm circular magnets
- These can be bought in large number cheaply anywhere.
- An additional six are needed for the “big” variant.
Assembly
Magnets can be pressed into the body first, then stack magnets on the body and press the lid on, aligning the holes. They should all just press together. You can use a pen or other small object to fully seat the magnets if they're still poking out a bit.