Shelf with standards, One Part!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shelf is for the Skadis system and printed without supports in one time. With or without a border.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a shelf which I made for the IKEA Skadis board. It is very easy to print.
You can print it in one time, without supports. And if you want, you can print it all at once, or separately.
I used three M3x10 screws and three times a 3mm Tnut, from ORM https://www.printables.com/model/450444-skadis-t-nut-mounting-system-threaded-for-m3-or-un
You can print it upside-down and if you use e.g. a powder coated sheet, you can have a nice surface. So also for the border.
You can use some glue to attach the border to the shelf.
I used PETG, but PLA or other material will also work great.
You have two choices: 240x150mm or 240x100mm. The STL you can find in the downloads.
I hope you will find it a nice shelf!