Reolink FE-P/FE-W Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its'a'big tube!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got a reolink fisheye on the ceiling and finding that something else is hanging down in the way? No problem, print this absurdly long tube and put it in between!
The Fusion file is included so that you can adjust the length (anywhere from about 50mm up to as tall as your printer can go).
Installing is pretty simple since you can use the same ceiling mount screws on this tube. You'll likely need an extension or very long screw driver. After that, just grab any ‘ol screw that’ll fit through the reolink mounting plate and drive them into the the lower mounts of the tube, creating threads as you go.
Creates a nice void for the camera ethernet tail as well.
Hat Tip to https://www.printables.com/model/936985-reolink-fisheye-camera-mount, where I got the mounting hole dimensions