P
PrintablesDAVEfromCZE
ELEGOO JUPITER FEP/ PFA_tool
Need 3pcs screw 3x20 You can speed up print up to 150% on MK3s
Wydruk około 5,58 €–6,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 165
- Polubienia
- 10
- Ocena
- 0
Wyniki wyszukiwania: fep
Liczymy pasujące modele…
P
PrintablesFizzle
Elegoo Saturn 4 Ultra/16K PFA/FEP Film Spacer
Simple 80x80x8mm box with beveled edges meant to be a good size and height as a spacer when installing new PFA/FEP film. Designed for the Elegoo Saturn IV Ultra/16K, But should be well enough for other 10" resin printers. I made mine out…
- Pobrania
- 166
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMorris Lazootin
EVE 280Ah LiFePO4 Terminal Busbar Covers
Covers the busbar (and the nuts!) to reduce the chance of a short circuit. Available in 2x and 4x cell configuration. Friction fits on 11.2mm nuts - this allows clearance on any BMS wires/attachments. No supports required - designed to be…
- Pobrania
- 159
- Polubienia
- 21
- Ocena
- 4
P
PrintablesBloodyT
Saturn2 PFA / FEP Foil Tool
I created this little Tool to change my FEP / PFA Foil on the VAT of my Elegoo Saturn 2. worked fine, so I decided to share it. Easy fast print, no fiddling around with finding the right type of packing stuff to shim under your VAT Foil.…
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
Printablesdowgy
Elegoo Saturn 4 Ultra 12K/16K FEP/PFA Film Spacer Block
A simple 80mm x 80mm x 8mm block with rounded edges for installing new film on your Saturn 4 Ultra 12K or 16K. Files include versions with and without text labels.
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printables
EcoWorthy 8Ah LiFePO4 Battery Cap with Anderson PowerPoles and Fuse
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
P
Printables
Minimal LiFePo4 20h battery bracket.
I made this bracket to keep my batteries in a line. It's not intended to be strong. there are stronger ones. The idea is to make them wobble less. The wall is supposed to be 1mm, but for some reason it is less than that. I could increase…
P
Printables
LiFePO4 MB31 cuprum busbar cover
Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.
P
Printables
Lifepo4 40135 EVE Battery Cell Holder with cover
Description I was looking for a holder/spacer for a Lifepo4 battery set based on EVE 40135 cells. So no models were found and I decided to build my own. The model consists of 2 parts: a holder with additional places for busbars or wires…
P
Printables
LiFePo battery caps (18Ah, M5/M6)
Liquid/short circuit protection caps for a specific style of LiFePO4 batteries, the kind that do 18Ah and have an M5/M6 screw terminal, with the anode on the left. The size of this case is 181mm x 76.4 x 166mm. It includes an internal…
P
Printables
Osłony Terminali Busbar Ogniw LiFePo4 280Ah
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem: Materiały ze składania magazynu na tej obudowie: - Jeżeli chciałbyś zapoznać się z…
P
Printables
JK BMS to Pace LiFePo4 box kit
Kit to install a JK BMS RESS (JK-PB2A16S20P) into a server rack battery / lifepo4 case originally delivered with a Pace 200A BMS (other models like 150A might also be compatible). Print mounting point adapter with supports. I used organic…
P
Printables
WattCycle 12V 100Ah LiFePO4 Bluetooth Mini hold down/shield thing for DIY battery box
This battery is pretty nice, screwed casement, bluetooth, new EVE 320WH cells (x4). Low and high temp protection works. Needed something for my DIY Starlink + 5G battery box thing. Feels insane to know I have 1,200Wh in this Apache 3800…
P
Printables
Daly BMS Smart lifepo4 BMS + Display
Für das 150 A Daly BMS habe ich eine Halterung gemacht. Ebenso für das Display. Und eine Abdeckung für die beiden Kontakte des BMS, da diese doch sehr exponiert sind. Für den Bluetooth Adapter habe ich eine kleine Halterung gemacht, damit…
P
Printables
Meshtastic carrier board for LifePo4 Battery, Charge Controller and Station G1/G2
Parts list for complete build out coming soon…
P
Printables
LiFePo4 Battery Pack Kit - 280k/302/304/310/320ah Cells
Will work with Bambu and other large bed printers. Not compatible with Ender3 printers. This is a DIY battery enclosure kit, for the DIY battery building community. I had originally made a kit using 280ah-sized cell for my RV, it worked…
P
Printables
CALB CA series LiFePO4 battery terminal cover
This is a battery terminal cover for CALB LiFePO4 CA180FI and similar battery cells. It's designed to fit the OEM CALB bus bars with the OEM bolts, washers, and locking rings, and includes a gap for a heat shrink ring terminal for your…
P
Printables
EcoWorthy 8Ah LiFePO4 Battery Cap with Anderson PowerPoles and Fuse
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
P
Printables
Phrozen Sonic Mini and Mini 4k FEP mounting frame
This is technically not necessary for mounting the FEP or NFEP to the vat. However, it does simplify things and assures that you get no wrinkles or lose corners. As you can see from the pictures, the idea is to put the FEP on the frame,…
P
Printables
Phrozen Sonic Mighty 4K FEP mounting frame
This is technically not necessary for mounting the FEP or NFEP to the vat. However, it does simplify things and assures that you get no wrinkles or lose corners. As you can see from the pictures, the idea is to put the FEP on the frame,…
P
Printables
EVE 15ah 33140 LiFePO4 4S Case battery
Case for 4S EVE 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і активний…
P
Printables
10Ah LIFEPO4 Battery Holder
This battery holder is designed to house a 10Ah lifepo4 battery for electronics projects. Mounting hardware is #6 machine screws or can be glued down. The corresponding file for the battery clip is included as well.
P
Printables
10Ah LIFEPO4 Battery Holder (Updated Version)
Updated version Designed for Nermak 10Ah battery but will likely work with other 10Ah batteries.
P
Printables
Case for 4S/8S Gloyuda 15ah 33140 LiFePO4 battery
Case for 4S/8S Gloyuda 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і…
P
Printables
Case for lifepo4 battery to replace the lead one
Case for lifepo4 battery to replace the lead one these batteries were used: cbak lifepo4 ifr32140 Корпус для батареї lifepo4 на заміну свинцевої використовувалися такі батареї: cbak lifepo4 ifr32140 screw holes 3 mm PETG Category: Other
P
Printables
YIXIANG DIY Case/Box LiFePo4 V2 vent holes cover
Keeps the dust and bugs out of the box. Printed in PETG. 0.2 layer height. You can use 6 m3 screws to keep it in place (not mandatory).
P
Printables
Holder for Saft VL30P Fe LiFePO4
Holder for Saft VL30P Fe LiFePO4 https://youtu.be/gAnFsZmzqos Category: Other
P
Printables
LiFePO4 Phone Charging Power Box with Anderson Powerpoles
At the Orlando Hamcation in 2025, I was lugging around a 100Ah REDODO battery and a 12v-5v adapter to charge my phone and iPad, so I designed this as a lightweight and portable solution. The Amazon links below are affiliate links. I…
P
Printables
Lifepo4 Battery Pack stand
This project provides 3D-printable designs for creating top and bottom covers for a LiFePO4 battery storage system. Designed to enhance the safety, durability, and aesthetic of your battery setup, these covers are ideal for residential or…
P
Printables
Terminal post cover for LifePo4 battery
Version 2 includes a little overhang as I had part of the terminal exposed in the original design.
P
Printables
Raspberry Pi 3 Case for PiTFT 2.8 LCD and LiFePO4 UPS
Enclosure for Raspberry Pi 2 or 3 with the Adafruit 2.8" PiTFT touchscreen lcd Adafruit PiTFT used: https://www.adafruit.com/product/1601 This has the LiFePO4 UPS from here: https://lifepo4wered.com/lifepo4wered-pi+.html With the two…
P
Printables
LiFePo4 100ah battery reference model
This is a reference model of LiFePo4 100ah battery produced by Saijiaoyang. Specs size: 148*52*119mm which is slightly different, the model was created by measuring the original battery with precise calipers.
P
Printables
Elegoo Saturn 4 Ultra FEP Mount
Montagehilfe für FEP-Folie – kompatibel mit Elegoo Saturn 4 Ultra Die Montagehilfe dient der präzisen Positionierung und Fixierung der FEP-Folie beim Einbau in den Resin-Tank des Elegoo Saturn 4 Ultra. Sie sorgt für gleichmäßige Spannung…
P
Printables
Sestava pro smontování baterie LiFePo4 ze 4 článků, jmenovitých 12V
Mezikusy a rohové držáky pro svorníky ze závitových tyčí úchyt pro BMS. Po délce jsou otvory pro svorník M8, po šířce M6. Z čela jsou předpřipraveny otvory pro šrouby M5 s šestihranou hlavou pro uchycení balancéru (BMS). Pro sestavu jak…
P
Printables
LiFePO4 100/105Ah Super STRONG Fully Modular Case + BMS CASE
Printed in petg, the more perimeters, the stronger it will be. I suggest inserting m3 bolts in the round protrusions as in the photos, otherwise they may break, also you may use a bit of glue to make the whole thing non-separable… I used…
P
Printables
Anderson PowerPole system for Eco-Worthy LiFePo4 30Ah
This is a rough-and-ready make. I was doing a POTA and wanted to have Anderson PowerPoles instead of exposed battery terminals. Since printing mine, I've refined the design a little, but the main elements are all there. The PowerPoles are…
P
Printables
Mars 4 Ultra FEP Tensioner Tool
Based on earlier ideas and downloads I created a FEP tensioner for Elegoo Mars 4 Ultra. This fits build plates 95x160mm. Designed with TinkerCad, printed on my BambuLab A1 with AMS lite with PETG. Variable layer height. After printing,…
P
Printables
Film Spacer for FEP or NFEP Vats
This is a 12mm tall (60mm by 60mm wide) spacer to help create appropriate space to allow for tensioning when tightening screws on the plates and installing back in the Vat. I was inspired by J3D from Lychee (see YouTube video) as I felt…
P
Printables
FEP Tube holder (1.7ml Eppendorf tubes)
a sample holder for FEP tubes with Light Sheet ready samples.
P
Printables
Hyundai Ioniq AE LiFePO4 Battery Holder
A holder to fit a compact LiFePO4 100Ah battery in tilted position into the Hyundai Ioniq (2016-1019). It can be clamped into the original battery holder and uses 3 lashing straps with a width of 2.5cm to strap down the battery. I highly…
P
Printables
Vaultek Lifepod 2.0 Glock 17 Gen3 Insert
Remix of the Veracon Glock 7 Gen 15 insert, just with some cutouts for the finger grooves and sights, and modified text I used clean one because I prefered textured build plate
P
Printables
Battery Cage for 2x Eremit LiFePO4 12x6Ah
Have two of the batteries with you. Simple design for a bottom an top part to be strapped together with welcro.
P
Printables
LiFePo4 Battery Dummy (AA and AAA)
This is a dummy battery you can use to pad your battery holder when using LiFePo4 batteries. Add one dummy per 3.2V LiFePo4 AA battery to achieve roughly the intended voltage. Use two 10 mm M3 screws as the terminals, and any kind of wire…
P
Printables
POWER QUEEN - 190ah LiFePO4 Battery Terminal Covers
POWER QUEEN - 190ah LiFePO4 Battery Terminal Covers I needed a way to keep the battery terminals covered safely. I have several of these setup with repeaters up on mountain tops where it is a shared location. I didn't want some stray…
P
Printables
Replacement stand for LifePro adjustable 15lb dumbbells
You'll need to print two of these and connect them together with M5x8 threaded inserts and bolts. It's admittedly a little tricky to get the bolts threaded in. I used a needle nose pliers to get them tightened up.
P
Printables
Elegoo Mars 3 FEP Tension Tool
Tool to make the tensioning of your Mars 3's FEP easier. It is recommended to apply kapton tape to the top surface to avoid scratching and/or denting the new FEP sheet. This was designed based off of the concept by PhoenixBlueStudios (…
P
Printables
32ah 12v LiFePo4 Battery Vibration Reduction Feet
These are vibration reduction feet for 12v 32ah LiFePo4 batteries from Battery Hookup. Print in tpu with only one wall and very low infil to allow the feet to flex. These should be glued to the battery to prevent them from coming off. The…
P
Printables
"Hat" for 100amp Hour LifePo Battery
After purchasing my LifePo battery I quickly realized It needed more. First, the ability to accidently reverse polarity was too damn high, so I wanted to resolve that. The back panel has a spot for a switch , a fuse , and Xt60 for…
P
Printables
18650 LiFePO4 battery 2S2P holder - 6V
I used it as a motorcycle battery in JAWA 250/353 instead of leaded 6V battery. It saves a lot of place. Used cells are LiFePo4. Print instructions Printed from PETG or ABS
P
Printables
Breakneck CPAP adaptor for 5/8 FEP Convoluted Tubing
Was melting my CPAP hoses and got this high temp 5/8 FEP Convoluted Tubing and because it isn't smooth on the inside I designed threaded hose adaptors to fit the tubing. Also designed a part that fits on the Mammoth CPAP system
P
Printables
LiFePO4 LiitoKala 3.2V 20Ah - MODEL
LiFePO4 LiitoKala 3.2V 20Ah - MODELLiFePO4 LiitoKala 3.2V 20Ah - MODEL
P
Printables
3.2V 32Ah Lifepo4 Rechargeable Battery - MODEL
3.2V 32Ah Lifepo4 Rechargeable Battery - MODEL3.2V 32Ah Lifepo4 Rechargeable Battery - MODEL
P
Printables
Minimal LiFePo4 20h battery bracket.
I made this bracket to keep my batteries in a line. It's not intended to be strong. there are stronger ones. The idea is to make them wobble less. The wall is supposed to be 1mm, but for some reason it is less than that. I could increase…
P
Printables
Prismatic LiFePo4 Tap and Drill Alignment Jig
Prismatic LiFePo4 Tap and Drill jig for cells without terminal connectors. Easily drill (6-7mm) into the blank terminal with the alignment jig and tap. The relieve in the side for the aluminium shavings sometimes gets clogged, but easily…
P
Printables
Inline Breaker for Battery (Lifepo4) - "Ham Radio Dudes Box"
Hey, welcome to my Thingiverse page. First, I may have a video coming out on this in a few days. This will show my print, the build, and thoughts. Parts used: Power pole connectors. 12 awg wire for 25 amp These are the fuses/circuit…
P
Printables
Little Dude - Lifepo4 Battery Box (Apache 1800)
This is a remix from N9DMT. I filled in the holes to create a blank, then I made three holes for my switches and a smaller hole for a power pole. (Power pole may need to be enlarged or slightly drilled out) The Name: Little Dude is a…
P
Printables
Dual 3S LiFePO4 battery to pinecil battery
Dual 3S LiFePO4 battery to pinecil battery Top does not hold well but allow for quick battery removal if needed (might as well save a few cts of pla).
P
Printables
battery protector / Bumper / Hülle für 6Ah Eremit LiFePo
Ich habe die Hülle designed, um meinen Akku etwas sorgloser in den Rucksack werfen zu können. Der Akku wird an der Kontur gehalten und sitzt recht sicher in der Hülle. Das Loch im zweiten Modell vereinfacht die Entnahme des Akkus ganz…
P
Printables
FEP Counter for any Resin Printer
Because I have multiple tanks and all the tanks look the same it's gotten hard to keep track of how many prints are done on each one, and which one had which type of resin in it. So I made this labelled FEP Counter which you can glue or…
P
Printables
Terminal cover / bracket for 75Ah 90Ah and 105Ah LiFePO4 Cells
These caps are a copy of a design by another company, which made these using an injection moulded process. They fit cells with top dimensions 130x36mm. This includes 75Ah, 90Ah, 105Ah cells and probably more. These LiFePO4 cells are…
P
Printables
LiFePO4 Terminal / Busbar Cover, Strengthened & Improved
This is a quick remix of a terminal cover set for most 280-310Ah LiFePO4 Prismatic Cells. The original files for the busbars were well designed but unfortunately quite weak and so would consistently split apart when I tried to snap them…
P
Printables
Money Tray for Vaultek Lifepod 2.0 gun safe
The Vaultek Lifepod 2.0 also makes a great safe for personal items. This design has 7 spots for items and allows the optional accessory tray to sit above it.
P
Printables
Resin Vat Spatula | FEP Safe Scraper
BOM: Printed with ROSA3D High Speed PLA Army Green This is a functional replica of the standard plastic spatula often included with SLA/DLP resin 3D printers. It is designed specifically for mixing resin in the vat and gently checking for…
P
Printables
Prismatic LiFePO4 batteries M6 terminal/busbar cover
PETG should be used as non-flammable or less-flammable material. 15% infill is enough.
P
Printables
Lifeproof Flooring Block Tool
This hammer/tapping block is used to install Lifeproof Vinyl Flooring. The notch along the length and width of the block allow you to hammer the plank without damaging the tongue or grove. Print Info Filament: Inland PLA PRO (PLA+) Black…
P
Printables
LiFePo4Charger
This is a simple 32700 LiFePO4 battery charger, that I've build to precharge a replacement battery for my MeshCore Repeater . It fits a common USB charging board from AliExpress . The OpenSCAD source files are maintained on GitHub .
P
Printables
Anycubic FEP Tuner
I made a tiny FEP tuner, just place this under your FEP film while tuning to get the right tightness of your film. The tuner has a height of 13mm wich gives your FEP the perfect slack before tuning.
P
Printables
120Ah LiFePO4 Battery Cell Holder & Spacer (174mm x 48mm)
Building a DIY battery bank requires precision and safety. These spacers are designed to securely hold 3.2V 120Ah LiFePO4 cells , ensuring they remain perfectly aligned for busbar installation while providing structural integrity to your…
P
Printables
LiFePO4 MB31 cuprum busbar cover
Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.
P
Printables
LiFePo 32700 battery holder
remix pochádza : https://www.thingiverse.com/thing:941081 -vložil som do: flexbatter_new.scad možnosť vytvoriť držiak pre LiFePO 32700 možnosť vytvoriť serie ,paralel viac článkov..
P
Printables
Low Voltage Alarm Box. HXYP RN01 heltec 12v 5v 24v power station lfp lifepo4 battery batteries cell
Box for Low Voltage Alarm. need 4screws, or you can just glue the board inside. the lid is press-fit, could be glued too if needed. my main use for this is DIY LiFePo4 power stations . its hard to know when the power will cut out if you…
P
Printables
Serviceable FEP Frame – Anycubic Photon Mono
I designed a replacement FEP frame for the Anycubic Photon Mono because original replacements are becoming difficult to find and many existing designs online are not very reliable. This version is fully serviceable , meaning you can…
P
Printables
Elegoo Saturn 3 release film FEP ACF slack tensioner
Print it as is, you will get a perfect release film tension every time you swap it.
P
Printables
Ovládací kolečko k pádlu Lifepak 12 (pouze pro tréninkové účely) Lifepak 12 control wheel (training use only)
Tento díl je vhodný pouze pro použití u defibrilátoru sloužícímu k tréninkovým účelům, ne jako náhradní díl pro defibrilátory v ostrém použití. Autor nenese žádnou odpovědnost za funkci a bezpečnost modelu. This part is only suitable for…
P
Printables
Field Expedient Phone Stand (FEPS)
The Field Expedient Phone Stand provides a rugged and simple way to prop up your phone. Use sticks, spare ammo, or whatever you may find in your environment to stick through the holes and brace the FEPS. The holes nicely accept 5.45, 5.56…
P
Printables
6S 6700mAh LiFePO4 Field Battery Pack (No Spot-Welder Needed)
Context Lithium Iron Phosphate (LiFePO4) technology is evolving rapidly. While the energy density is slightly lower than traditional Li-Ion, LiFePO4 cells offer a significantly better price-per-kWh and a much longer lifespan (often 2000+…
P
Printables
Battery Terminal Clip on Covers for lifepo4 100ah cells
Printed with Bambu P1s, Bambulabs Clear PETG. 0.2mm layer height
P
Printables
Eve LiFePo4 LF304 busbar cover - Without nkon.nl Logo
Printed out of ASA with shrinkage compensated, 0.2mm layer height. Clicks in it's place over the busbar. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 Wirebox
P
Printables
squeegee for the FEP film cleaning
The squeegee for resin printers uses TPU filament, which can effectively protect the FEP film from being scratched.
P
Printables
Terminal cover for 314Ah LiFePO4 battery
Krytka pólů lifepo4 baterie (314Ah) s terminály se závity M6. Kryje celou propojovací lištu článku. Drží nacvaknutý přímo na té propojce. U terminálů je "okénko" pro vyvedení kablíku k BMSce. Z vrchu krytky je malá zdířka pro možnost…
P
Printables
4S2P 32700 LiFePO4 Battery Pack For Amateur Radio
DISCLAMER: Building lithium battery packs carries real risk. Cells can short, vent, catch fire or cause serious injury and property damage if they are damaged, wired incorrectly, charged improperly or protected inadequately. Spot welding,…
P
Printables
Miata Cup Holder / Phone Holder 2.0 (iphone 6 With lifeproof)
Hi Guys Now that its summer i realized the old design was too thin (it melted sitting in my car) and i also realized there no reason i couldn't Keep the cup holder functionality! if you printed the old design you know the struggle at…
P
Printables
Ipad Mini 2 mounting plate with Lifeproof NUUD case
Use this to mount an iPad Mini 2 with Lifeproof NUUD case to a Nomad Rally tower. You must make a mount for the case to the Tower. Mine is made of aluminium hence no file here. I may model one eventually for ABS etc. There is a Husqvarna…
P
Printables
elago saturn fep tension setter
place it under the fep when tightening the screws before fitting to the main try. this will set the right amount of stretch needed when u tighten it all down, fits the saturn fine but should work with mars and other ones as well
P
Printables
Prusa SL1. Mask for screwing prevent damage FEP.
Mask for screwing prevent damage FEP. Print instructions Category: 3D Printer Accessories
P
Printables
Slotted FEP Scraper (Wider handle - larger hands)
This is the scraper I now print for vat cleaning. It is slotted for catching floaties in the resin so you don't damage your FEP. Not really ideal for the bed, but it can be used for it in a pinch. Model superceded by fully unlabelled…
P
Printables
FEP Scraper - Non-Slotted
This was the original, really. It's a non-slotted version of the FEP scraper/spatula/putty knife I use. Some people may want the extra body for scraping build plates like a 500lb gorilla :)
P
Printables
8-cell battery pack housing for 32113 cell size (A123 LiFePO4)
Modification of original by rounding corners (better for shrink-wrapping) and adjusted the cell radius and length to work for the much larger 32113 cell size made by A123 for automotive applications. Pack is for 8 cells. If wired in…
P
Printables
FEP Race!
Print at least two of these. Put 15 grams of resin into two or more vats. Let sit level at 20 degrees C. Ensure the entire sheet is coated. Once at stable temp and levelness, quickly put the two or more vats onto the platform. Make…
P
Printables
Resin Tray FEP Tension Jig
Use this to set tension for the FEP on an Anycubic Photon, Zortrax Inkspire, Phrozen Shuffle, Mars, or similar resin printer. Category: 3D Printer Accessories
P
Printables
Battery Terminal Clip on Covers for lifepo4 280ah cells
Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.
P
Printables
90Ah LiFePo Cell Pack for Camper Vans replacing a Standard 75Ah Acidblock.
The Designs Goal was to to keep the Pack inside the Footprint of an Standard Acid Car Battery. Readymade Packs are always to tall to fit in one of the Batterystorages under the Front Seating of my VW T3. For the outer Framing use 10mm…
P
Printables
LiFePO4 125Ah contact protection
LiFePO4 contact protection https://www.mivvyenergy.cz/cs/clanky-lifepo4/136-166-clanek-lifepo4-120ah-32v-higee.html
P
Printables
25Ah LifePO4 12V battery brackets
I like building lifepo4 batteries; one of the easier to find types of cells I've used are these 25Ah lifepo4 cells that I picked up from batteryhookup.com (they have had them from time to time). These brackets do a few things: Provide…