Resin Vat Spatula | FEP Safe Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Essential plastic spatula for mixing resin and cleaning the vat. Rounded edges are safe for delicate FEP films.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
BOM: Printed with ROSA3D High Speed PLA Army Green
This is a functional replica of the standard plastic spatula often included with SLA/DLP resin 3D printers. It is designed specifically for mixing resin in the vat and gently checking for failed prints on the bottom of the tank.
Why print this?
FEP Safe: The edge is designed to be effective at lifting cured bits but rounded enough to minimize the risk of scratching or puncturing the delicate FEP release film.
Ergonomic: Features a comfortable handle with a hole for hanging storage.
Versatile: Perfect for stirring separated pigments in the resin, cleaning drips, or general light scraping tasks.
Printing Instructions:
Supports: None required. Prints flat on the build plate.
Material: PLA works well. PETG is recommended for better chemical resistance if you use strong solvents for cleaning.
Infill: 100% or 4-5 walls is recommended to make it rigid and durable.
If you lost your original scraper, this is the perfect quick replacement!