LiFePO4 100/105Ah Super STRONG Fully Modular Case + BMS CASE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a case for UPS LiFePo4 BATTERY, very strong, and I've made it. It includes a case for 60a jabaida BMS.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 1088
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed in petg, the more perimeters, the stronger it will be.
I suggest inserting m3 bolts in the round protrusions as in the photos, otherwise they may break, also you may use a bit of glue to make the whole thing non-separable…
I used m5 long threaded rods to mount everything together, and laser-cut separators from a 2.6mm plywood (1 between each of the elements and 2 from both sides, 7 in total for 4-elements battery)
Keep in mind that small inserts are not equal. The top ones are a little bigger.
I always use drill to make the holes smoother, so I advise you to do so as well. 5.5mm for 5-mm rods and 2.2mm for screwing in m3 bolts.
It's a very filament-consuming thing, 1.5kg at least. But it is very, extremely strong.
…right now I'm working on the next version, based mostly on laser-cut parts, but it should be less expensive… follow me :)