1 / 3
X Shot MPP N-strike Barrel Lug Adapter — zdjęcie 1
1 / 3

X Shot MPP N-strike Barrel Lug Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adds a n-strike barrel lug attachment point to the front of you X Shot MPP

Ocena
5 / 5
Polubienia
30
Pobrania
42
Wydruki
1
Wyświetlenia
545
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Have you ever wanted to use an N-Strike barrel as a shroud for your X-Shot Motorized Piston Pump? Now you can!

All you’ll need is a pair of M3x6 screws.

The included collet on the blaster clamps the attachment securely in place, while the screws fasten the front piece with the N-Strike barrel lug to the attachment.

Depending on which N-Strike barrel you choose, you may need a longer aluminum barrel to provide enough length for attaching the BCAR/PCAR to the end. The stock barrels from the Recon or Retaliator are too long for this setup, but some of the shorter Modulus series barrels may work perfectly.

Tagi