Clean Pixi book holder for Ikea Mosslanda shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalistic Pixi book holder based on the Ikea Mosslanda shelf. It is very easy to use and clean looking.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
I was on the look for a clean storage for the many pixi books of my childs. This solution keeps them in reach is easy to put them in and out even for the kids and it can be sorted if it wanted. It also looks very good.
I have created the model in different lengths for 250x250 build plates as well for 180x180.
If you want to fill the full shelf I recommend to use 2x the 247.5 variant or 3x the 180 variant that adds up to 54cm in both cases (55cm is the length of the shelf.
If you want I also made a maxium length that can be put diagonally on the 250mm build plate.
You can also shorten it to the length you need by removing elements in the slicer or a cad örogrma of your choice. One element is always 4.5mm wide.
I used double sided tape to fix it to the shelf.
I have used a PLA with a 0.4mm nossle and 2 walls with 15% infill. It prints pretty fast and easy.