IKEA Skadis DeWALT battery pack holder XR / Držák na DeWALT baterie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holder for DeWalt batteries - both 18V and 54V for IKEA Skadis board
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA Skadis holder for 1 or 2 battery packs from DeWALT - fits both 18V and 54V versions. Slightly tilted, so removal of battery is easier and comfortable. Holder for 1 battery needs 2 universal hooks (in the attachment as STL), Holder for 2 batteries needs 4 hooks.
These batteries tend to be heavy, so I suggest using at least 3-4 perimeters and 25% infill. I prefer PETG but I believe PLA will survive too. You definitely dont want this print to fail and drop the batteries from the board.
*************************************************************************************************
CZ: Držák na akupacky XR od DeWALTu pro IKEA Skadis nástěnku. Přiloženy jsou modely pro 1 nebo 2 packy. Sedí do toho 18V i 54V řada. Baterky jsou mírně nakloněny k uživateli, aby se lépe vyndavaly a zandavaly.
Držák na 1 baterku potřebuje 2 háčky (přiloženy jako STL), držák na 2 baterky potřebuje 4 háčky. Doporučuji aspoň 3-4 perimetry - nechcete aby výtisk nevydržel a ty baterky spadly na zem :(