Prusa i3 MK3 X-axis-cable holder - Roomy Revo Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to provide more space for E3D Revo Six wiring connectors, shortened slightly and hole provided for nylon guide
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 228
- Wydruki
- 6
- Wyświetlenia
- 1753
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Love the original but when it came to installing the E3D Revo Six everything was just a little too tight and I couldn't tighten the screws all the way.
In addition, I noticed that when the carriage is on the far right the cable bundle would pull slightly. This is most noticeable when you do a belt check. The combination of the larger cable exit and a slight shortening will reduce this tension but there might still be some work to be done here in a later revision.
Changes made:
- Added 5mm of room to allow for cables and connectors
- Shortened slightly to reduce the tension when X-axis is on the far right
- Added mounting hole for the 3mm nylon guide
I hope you find it useful.