Prusa i3 MK3 X-axis-cable holder - Roomy Revo Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed to provide more space for E3D Revo Six wiring connectors, shortened slightly and hole provided for nylon guide
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 228
- Makes
- 6
- Views
- 1,753
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Love the original but when it came to installing the E3D Revo Six everything was just a little too tight and I couldn't tighten the screws all the way.
In addition, I noticed that when the carriage is on the far right the cable bundle would pull slightly. This is most noticeable when you do a belt check. The combination of the larger cable exit and a slight shortening will reduce this tension but there might still be some work to be done here in a later revision.
Changes made:
- Added 5mm of room to allow for cables and connectors
- Shortened slightly to reduce the tension when X-axis is on the far right
- Added mounting hole for the 3mm nylon guide
I hope you find it useful.