1 / 5
Creality Sermoon S1 Scan Bridge shim for better mounting — zdjęcie 1
1 / 5

Creality Sermoon S1 Scan Bridge shim for better mounting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created this shim since the stock mounting plate doesn't fit well to the Sermoon S1

Ocena
0 / 5
Polubienia
4
Pobrania
43
Wydruki
0
Wyświetlenia
242
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

3D-scan used for modeling: https://www.printables.com/model/1385022-creality-sermoon-s1-3d-scan-xyz-aligned

Also look at my other designs for the Sermoon S1.

I created this shim since the stock mounting plate doesn't fit well to the Sermoon S1. 

The shim itself can be secured with some thin double-sided tape to the original mounting plate (use the cutout as orientation) and even some tape to the scanner itself to gain some friction.

Since the stock screw is barely long enough to bind I used a 2mm longer one: https://de.aliexpress.com/item/1005006654252037.html?spm=a2g0o.order_list.order_list_main.10.25c91802RYfmeh&gatewayAdapt=glo2deu (1/4 Camera Screw, 0.4in long)

Tagi