Creality Sermoon S1 Scan Bridge shim for better mounting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this shim since the stock mounting plate doesn't fit well to the Sermoon S1
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
3D-scan used for modeling: https://www.printables.com/model/1385022-creality-sermoon-s1-3d-scan-xyz-aligned
Also look at my other designs for the Sermoon S1.
I created this shim since the stock mounting plate doesn't fit well to the Sermoon S1.
The shim itself can be secured with some thin double-sided tape to the original mounting plate (use the cutout as orientation) and even some tape to the scanner itself to gain some friction.
Since the stock screw is barely long enough to bind I used a 2mm longer one: https://de.aliexpress.com/item/1005006654252037.html?spm=a2g0o.order_list.order_list_main.10.25c91802RYfmeh&gatewayAdapt=glo2deu (1/4 Camera Screw, 0.4in long)