Raspberry Pi Touch Display 2 (5-inch) IKEA Skadis Mount [Landscape]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for the 5-version official RPi Touch Display 2.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for the 5-inch version of the Raspberry Pi Touch Display 2 (SKU SC1975) only.
Orientation is landscape only, but either way. The default is as pictured but you can mount the other way around by mirroring both parts in your slicer.
All ports and GPIO pins are accessible, with enough clearance between the Pi and the Skadis for most heatsinks and connectors. Total maximum height of the Pi and addons is 25.5mm (or around 8mm above the USB ports for reference). The front of the touch screen sits 42mm from the face of the Skadis.
Print one of each (right and left) part. No additional hardware required. Everything clips firmly into place and once mounted is very study. There's no need to remove the Pi, display ribbon or power cable beforehand.
If you find the ‘right’ part too difficult to push in place, first try each tab separately in the opposite slot to scrape into the centre notch.
No supports.
Portrait version also available: https://www.printables.com/model/1398108-raspberry-pi-touch-display-2-5-inch-ikea-skadis-mo