Bolt Knob - M6 SHCS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wing-nut shaped bolt knob designed to be pressed onto an M6 socket head cap screw (SHCS) and turn it into a wing-bolt
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A wing-nut shaped piece that is designed to be pressed onto the head of an M6 Socket Head Cap Screw (SHCS) and turn it into a hand-turnable “wing-bolt”. Hopefully the pictures make it clear
I used an arbor press to press it on, but you could get it on by holding it in a vise and tapping it home with a hammer, or maybe even closing it with a wood clamp? It presses on pretty tight, but not so tight that it will be a pain to get it on.
STEP and STL files included, or you can check out the OnShape file here if you'd like to remix it.