1 / 8
CR425 Battery Box – 27 Cells + 2 Chargers + Extra — zdjęcie 1
1 / 8

CR425 Battery Box – 27 Cells + 2 Chargers + Extra

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Large and versatile storage box designed for 27 CR425 batteries, 2 USB chargers, and an extra compartment for accessorie

Ocena
0 / 5
Polubienia
3
Pobrania
46
Wydruki
0
Wyświetlenia
309
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Features

  • Holds up to 27 CR425 batteries (approx. 4×25 mm each)
  • Slots for 2 USB chargers – always have a backup ready
  • Extra storage compartment – for cables, float tips, or spare parts
  • Secure fit – batteries stay in place without rattling
  • Portable design – fits in a fishing bag or tackle box
  • Easy printing – no supports needed if printed in separate parts

Recommended Print Settings

  • Material: PLA or PETG (PETG recommended for outdoor use)
  • Layer Height: 0.2 mm
  • Infill: 15–20%
  • Supports: Not required

Assembly

To assemble the box, you will need:

  • 3 × M3 D912 screws, 35 mm length

These screws ensure a strong and reliable connection between the box parts.

Tip: Tighten gently — overtightening may crack the plastic.

Print Tips

  • If you plan to carry it outdoors often, print in PETG for better durability and moisture resistance.
  • The extra compartment can hold small items like USB cables, float tips, or spare LEDs.
  • For a tighter fit, add a thin piece of EVA foam inside the lid.

Tagi