smART Sketch 2.0 Battery Door Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
smART Sketch 2.0 Battery Door Replacement
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
We got a used smART Sketch 2.0 projector, but the battery door was missing. This replacement door was modeled using measurements only of the main unit and not the door itself.
Printing
Orient the print standing up, with the narrow portion on the bed. The retention notch should be on top, with the screw hole's teardrop shape looking like it's dripping down.
My print bed may have been dirty as my first print in this orientation failed, but then cleaned the bed and added mouse ears, present in the 3mf version, that ensured bed adhesion.
Hardware
I'm not sure what size screw/bolt was used on the original door, but an M3x10mm worked for me.