smART Sketch 2.0 Battery Door Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.00 – €1.23 net (excluding VAT)
For file: Smart Sketch Battery Door_0.4n_0.2mm_PETG_COREONE_1h10m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.12 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
smART Sketch 2.0 Battery Door Replacement
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
We got a used smART Sketch 2.0 projector, but the battery door was missing. This replacement door was modeled using measurements only of the main unit and not the door itself.
Printing
Orient the print standing up, with the narrow portion on the bed. The retention notch should be on top, with the screw hole's teardrop shape looking like it's dripping down.
My print bed may have been dirty as my first print in this orientation failed, but then cleaned the bed and added mouse ears, present in the 3mf version, that ensured bed adhesion.
Hardware
I'm not sure what size screw/bolt was used on the original door, but an M3x10mm worked for me.