Case Dual 18650 lithium battery charger module waterproof
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waterproof case for Dual 18650 lithium battery charger module
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
My friend needed a battery for his bicycle light, and I found the Lithium charger module that's available in 12v, 9v or 5v.
Needed a case for it that can be attached to the bicycle frame, so I came up with this design that I created in Fusion 360.
He asked for the thumb screws, so you don't need a screwdriver to open when you need to get to the charging port.
He added a self-adhesive foam strip not to scratch the frame.
Use Velcro strips to attaches it to the frame.
Used PETG filament on a Creality K1 Max Printer for the Case with Tree Support
The water proofing rubber seals was printed with FILX TPR90 Filament that I get form FILX in Cape Town South Afrika
Othe parts needed
See BOM document for pictures and list of parts
You can use TPU
######################################
If you don't need it to be used outside, you can use PLA Filament
######################################
If you don't need it to be waterproof and using it inside, then you can just print and use the Top cover and Bottom Boddy
Please add a comment and Photo when you print it
Regards