Case Dual 18650 lithium battery charger module waterproof
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Waterproof case for Dual 18650 lithium battery charger module
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 59
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
My friend needed a battery for his bicycle light, and I found the Lithium charger module that's available in 12v, 9v or 5v.
Needed a case for it that can be attached to the bicycle frame, so I came up with this design that I created in Fusion 360.
He asked for the thumb screws, so you don't need a screwdriver to open when you need to get to the charging port.
He added a self-adhesive foam strip not to scratch the frame.
Use Velcro strips to attaches it to the frame.
Used PETG filament on a Creality K1 Max Printer for the Case with Tree Support
The water proofing rubber seals was printed with FILX TPR90 Filament that I get form FILX in Cape Town South Afrika
Othe parts needed
See BOM document for pictures and list of parts
You can use TPU
######################################
If you don't need it to be used outside, you can use PLA Filament
######################################
If you don't need it to be waterproof and using it inside, then you can just print and use the Top cover and Bottom Boddy
Please add a comment and Photo when you print it
Regards