Ikea Samla Drybox Filament Outlet with PC4-M6 on Slider (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix for the filament outlet made by Jindřich Beneš to connect a PTFE hose via a PC4-M4 fitting.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1011
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix for the Ikea Samla Drybox filament outlet by Jindřich Beneš for connecting a PTFE tube via a PC4-M4 fitting. I use it to get directly from the box into the MMU buffer with a PTFE hose. There I have an Easy to Load modification with a PC4-M10 PTFE fitting as an input and output.
The sliders have been slightly modified so that the assembly can be done from inside the box with countersunk M3 screws. I countersunk the holes on the inside so that the screws are level with the wall.
You need:
6x countersunk M3 screws (for the middle outlet the screws have to be shortened a bit)
6x M3 Nuts
3x PC4-M6 fittings
and a
IKEA Samla box with lid 39x28x28 cm / 22l