1 / 3
Costco (Whalen) Shelf Boots (floor protectors) — zdjęcie 1
1 / 3

Costco (Whalen) Shelf Boots (floor protectors)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple floor protectors (a single and a double) for Costco (Whalen brand) shelving units.

Ocena
0 / 5
Polubienia
25
Pobrania
90
Wydruki
0
Wyświetlenia
656
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My mum bought some heavy duty (~40kg) shelving units form Costco for her pantry. These are Whalen branded- see the photos for the box design. The pantry floor is linoleum so if the vertical columns of were placed directly on the floor the metal would pierce/damage it. 3d Printer to the rescue!

I made both a single boot and a double boot so you can have the shelves standing alone or split and side-by-side. 

Printing & Supports

I printed using Polymaker Blue PETG at 0.3mm layer heights and 20% infill. 

No supports required. 

Build

Print it, fit the boots onto the bottoms of the shelving columns. You can adjust the inner part of the folded steel to get a good fit to the boot so it stays in place during shelf assembly. 

Tagi