Neptune Xol carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Xol carriage for Neptune 3/4 with front mount mgn12h rail
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adaptation of the Xol carriage to use bottom belts instead of front belts. Still need to calculate the loss in Y and maybe Z (could also be gain depending on how the cables are managed).
Prerquisites
If you have the max lenght rail from this mod you can use the standart double shear bracket or even stock endstop
BOM
8x M3x5Dx4L Heat insert
2x M5x7Dx7L Heat insert
4x M3 Hex nut - 2x M3x6 BHCS
6x M3x8 SHCS - 2x M5x20 SHCS
2x M3x9Dx1L Large Washer
Instructions
Install 2 M5 heat inserts into the bottom of the carriage.
Assembly instructions for the Normal xol Carriage: Ignore steps 4, 7-9
Install 4 M3 heat inserts into the Belt carriage from the top of the part. Mount the belt inside the carriage and finally mount the carriage to the Nxol carriage.
It needs to use Silencedfrost's modified double shear mount to have an endstop so that the cart doesn't get flung off the rail when homing. Instructions and BOM
It should fit a standart Xol toolhead with no adjustment but for now that is still uncharted territory. The instructions are at best a draft so feel free to spam me with questions. Huge thanks to Beattune and Silencedfrost for helping me!!
Submit feature requests here!