X8R Antenna Mount for F450
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 Antenna mounts made for the DJI F450, but I am sure it also fits other frames just fine. I've mounted them like…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
2 Antenna mounts made for the DJI F450, but I am sure it also fits other frames just fine.
I've mounted them like recommended from frsky in a 90° angle to each other.
Made different versions for each one
- for a m2,5 or m3 thread insert
- Screw in m2,5 directly
- Screw in m3 directly
- through hole for m3
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Yes
Resolution:
0,15
Notes:
I used rafts for the flat one because it was printed with the smaller side on the bottom, I thought it would fall over because of the little area that sticks to the plate.
The thin walls are 1,2mm thick so best way is to print with 0,6 or 0,4 nozzle (resulting in no infill)
Category: R/C Vehicles