1 / 2
Stanley Punch Set Holder for SKADIS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SKADIS mount for Stanley brand bunch set (sometimes but not always branded as FatMax)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A holder/organizer for Stanley brand punch set (I believe the part number is 4-18-226). Sometimes branded as “FatMax”.
Designed to mount to Ikea SKADIS pegboard securely using T-Nuts. If you are not familiar with T-nuts, they are an alternative to traditional hooks that offer more strength and often allow models to print without supports.
Accessories Needed
- 2.5mm hex head screws (4). I used 20mm length.
- 2.5mm nuts (4) to be used for the T-nuts model below
- Four Skadis “T-nuts” for the 2.5mm size. Available here at https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb. When you print them, I suggest to print a bunch as you will find other t-nut models that use these.