Liczymy pasujące modele…
Update April-26: Thanks to @WK_0bjkt_4142451 for highlighting that some of the newer boxes have additional tabs that prevent these holders from working. Please see his comments for details. v2 update : Improvements to have a tighter fit…
Dieser Überzieher für das Einhand-Montagewerkzeug Stanley Fatmax Tradelift FMHT83550-1 oder FMHT83552-1 dient zum Schutz der zu hebenden Last gegen Kratzer, Beulen, usw. Das Druckteil ist leicht herzustellen, ich habe es in TPU gedruckt.…
Gridfnity Stanley 0-10-481 2x5 5U This is for the bigger version of the Stanley utility knife Designed in Freecad
These are insert for the stanley fatmax (deep) to split the depth for different items.
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
I made this to store my Stanley Ratcheting Driver and any hex bits I have. Plenty of spots for driver bits and other longer bits in the bins either side of the handle. I have uploaded the Fusion file too so you can modify it to meet your…
I created several holders for my favorite Stanley Fatmax tool. Maybe someone will find it useful. For the lamp holder, you need to add another hook to the board as seen in the photo. The lamp is easily removed and placed in the holder.…
Divider and removable boxes for Stanley Deep Pro organiser (90mm) Divider base piece splits each cup into two sections. Removable boxes integrate with existing locators and can be used with or without the base piece. Printed on PLA…
As the box I needed always was the one below every other I wanted some kind of sliding storage that allows for taking out the boxes easily allows for opening the boxes without taking them out :) I used Slides →…
I wanted to change a few things, but FreeCAD decided to tell me I am not (yet) worthy of making changes… So, I made a new Version, dimensions are more or less the same, but the draft angles were changed simplified model added a chamfer to…
Držák k přišroubování L,P díl. Velká díra je pro prostřižení dlouhého bitu nebo šroubováku. Like potesi dekuji.
Designed this holder for Stanley Box Beam Levels. Print Settings: .4 nozzle .2 layer height 20% infill 3 walls 3 top and bottom layers The slots in the model are 31mm wide, and have been tested with the following levels. Stanley FatMax…
I prefer the smaller 2m / 2 meter tape measure from Stanley Fatmax as it fits in pockets and is good for smaller/ quick measurements. Fit is good not too tight not too loose. Used it for the past 6 month at work and at home to see if…
Skadis pegboard holder for a folding Stanly Fatmax knife. Print with base down.
This is a remix of @TeachingTech ‘s Dyson battery adapter: hhttps://www.printables.com/model/180116-dyson-stick-vacuum-ryobi-battery-adaptor. See this page and his video for more info (also subscribe, his videos are great). My version…
This bin is designed specifically to hold Stanley Fatmax 6 ft tape measures for Zach Freedman's Gridfinity system. I designed it around model FMHT33706, but the 2 meter metric version (FMHT33856) also fits. It may also fit other brands or…
Tired of guessing what's inside your Stanley Fatmax organizer? These 3D-printable handle plates let you label each compartment for easy identification. Perfect for keeping your screws, bolts, and small parts neatly sorted. Designed to fit…
Vytvořil jsem přihradku do pořadače dewalt FAT MAX TSTAK. Je stohovatelna. Tisknul jsem ji v petg I created a compartment for the dewalt FAT MAX TSTAK file. It is stackable. I printed it in PETG
Cordless tool battery adapter. Stanley Fatmax Battery to Milwaukee skin tools Extra hardware 6mm male spade connector x2 wire female fuse terminal x3 M3 x10mm bolt & Hex nut x2 470k resistor spring (0.5mm, 35mm, 5mm) a retractable pen…
I could not find a decent shaped bin for this so I made my own with the Gridfinity bench in FreeCAD. It is for the pocket 2m FATMAX Measuring tape. Gridfinity parameters (x,y,z): 2u x 2u x 4u
Stanley Fatmax FMC 626 H1 reverse switch button
Update April-26: Thanks to @WK_0bjkt_4142451 for highlighting that some of the newer boxes have additional tabs that prevent these holders from working. Please see his comments for details. v2 update : Improvements to have a tighter fit…
Conçue pour s’insérer parfaitement dans les mallettes Stanley FatMax, cette boîte au format L (hauteur : 48 mm) permet de trier et stocker vos outils, accessoires ou visseries. Son design simple et ouvert facilite l’accès rapide au…
Cette boîte en forme de L est spécialement conçue pour s’emboîter dans les mallettes Stanley Fatmax. Sa hauteur de 48 mm respecte les dimensions standards de la gamme pour rester compatible avec les autres modules et le couvercle de la…
Replacement Bins for Stanley Fatmax Compatible and stackable with the existing bins. as designed, no support or extra hardware required. UPDATE: Added a half-sized, 4-width cup for longer tie-wraps. Diagonally printable on a core one
English: Tool holder for Stanley Fatmax 18V/20V machines, for efficient space organization. This model has been specifically designed to prevent the springs from being under pressure when the machine is docked, thus safeguarding your tool…
Adapter to put stanley fatmax v20 tools on skadis boards
Stanley Fatmax organizer battery case Print with 5% infill
This is a hanger for the stanley fatmax charger. 2 screws attach it to wall or side of a workbench. Easy to put battery in and out. Any material will do. I used cheap PLA. I printed it on a Twotree Bluer.
Replace for weak lock knob. Print from ABS, ASA or PETG. Cut 2 old screw pins and glue it.
🧰 Stanley Fatmax V20 Battery Holder Keep your workspace organized with this easy-to-print Stanley Fatmax V20 battery holder ! Designed for strength and simplicity — no supports needed and prints cleanly on most printers. Features: ⚙ Fits…
Originally I made this model (https://www.printables.com/model/1275208-stanley-fatmax-xtreme-10m33-tape-measure-skadis-ho) but it was not strong enough and the weight of the tape measure broke the holder over time. This is much more robust.
IKEA Skadis Hook for Stanley FATMAX knife. Print in place, no scaffolds
Removed the tabs on the original model and instead made it compatible with the t-nut mounting system.For mounting to Skadis board the M2.5 T-Nuts are needed and at least M2.5x12 counterbore screws. Remixed from…
Be careful with the box tolerances. I have six tall boxes, and one of them has a really tight fit. You can use a slicer modifier to remove a few millimeters from the top to make it less tight.
Solid model meant for spiralize-outer-contour printing. Works well on a 0.8mm nozzle on an Ender. You can fit 3 each time with "print one at a time". The part has two chamfers so there is no need for separate parts for each corner. Fit…
Cordless tool battery adapter. Skil PWRCORE 20 Battery to Black and Decker \ Stanley Fatmax skins Extra hardware wire female fuse terminal x3 6mm male spade connector x2 M3 x10mm bolt & Hex nut 10k ohm resistor Assembly should be self…
Simple bracket to wall mount a stanley fatmax v20 single battery charger (sfmcb12 type 1). Easy to slide out for mobile use. The main load should stand on the charger's pads (up to a point...). Takes 3.5mm screws. Use top or bottom to…
A Frech Cleat Mount for your V20 Stanley FatMax v20 Battery Chargers Suits 12mm Thick Cleats
A Frech Cleat Mount for your 18v Stanley FatMax Battery Chargers Suits 12mm Thick Cleats The battery mount is a separate model ( https://www.thingiverse.com/thing:3652720 ) and is to be glued to the cleat mount. I printed these in ABS and…
A Gridfinity bin specific to the FatMax folding utility knife. Print 0.4mm nozzle / 0.2mm layer height.
My colleague retired, and I received his tool backpack. Unfortunately, the handle was broken. I couldn’t find any replacement models anywhere, so I created something that should work. So far, I haven’t been able to test it. Feel free to…
Remix of the Stanley Fatmax utility knife holder to fit Multiboard. Print facing up with no supports. I used PETG with 3 perimeters and 15% infill
Dieser Überzieher für das Einhand-Montagewerkzeug Stanley Fatmax Tradelift FMHT83550-1 oder FMHT83552-1 dient zum Schutz der zu hebenden Last gegen Kratzer, Beulen, usw. Das Druckteil ist leicht herzustellen, ich habe es in TPU gedruckt.…
Gridfnity Stanley 0-10-481 2x5 5U This is for the bigger version of the Stanley utility knife Designed in Freecad
These are insert for the stanley fatmax (deep) to split the depth for different items.
mounts for your fatmax stuff 350mm between the holes If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.28 Infill:…
Slightly larger version of the fatmax tape measure holder. For the 8m version of the fatmax tape measure. Fits nicely, but leaves a mm around the body, so it's not stuck.
Description Cordless tool battery adapter. Dewalt Battery to Stanley Fatmax V20 tools Extra hardware spade connectors wire fuse terminal x3 M3 x10mm bolt & Hex nut x3 10k ohm resistor 6x30mm spring, might be able to use a pen spring Prep…
Suitable for STANLEY® FATMAX® Professional Organizer. https://www.stanleytools.com/product/fmst14820/stanley-fatmax-deep-pro-organizer?tid=576416 If anything needs to be modified you can use the source file. If you like it, please leave a…
These bins are made for the Stanley Fatmax Pro Shallow Organizer. The smaller subdivisions (4x, 6x) are not perfectly save for small parts, like washers, because of the lid design of the case. The bins need a slight print support on the…
Summery This is a Gridfinity tray to hold a tape measure. it works with a stanley 25' fatmax, and standard stanley 25'. History Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories…
This is a very simple holder for a Stnleyknife to be mounted on an Ikea Skadis pegboard. 0.2 mm No supports
Nastenny drzak aku naradi Stanley Fatmax v20 // Wall holder for Stanley Fatmax v20 acu tools
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
I saw ari.mandjelikian 's remix of these cups and they covered almost every scenario I wanted, execept I needed a small deep liner with 3 or 4 compartments, so I fired up Tinkercad and did these three remixes. One is simply a double…
This is my second remix of ari.mandjelikian 's cups, for this one I've created ½ height cups that sit in the top half of the original ones and leave space underneath. There are two single-divider versions with long and short dividers,…
A wall holder for my Stanley FatMax staple gun. Mounts with two screws through the body of the model. Printed in PLA, infill 20, bottom down with supports everywhere because of the small overhang part. This way the holes of the model…
A wall mounted holder for my Stanley FatMax hammer. Other brands of hammers might fit as well, maybe with a little bit of resizing. Countersunk holes for flush mounting. Printed in PLA. Infill 50. Paint-on-supports under the overhang.…
I used Stanley Fatmax Storage cases for a variety of different storage needs but for small parts needed compartmentalised trays. These trays stack 3 high to replace a normal single tray. Printed in PETG they match the flexibility of the…
This is a replacement washer for the FATMAX 4-In-1 Mobile Workstation. This will allow the workstation to slide open.
This divider fits the Stanley FatMax professional organizers. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20%
This divider fits the Stanley FatMax professional organizers. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20%
I have reduced the depth of the top drawer by 5mm to allow one at the top and one at the bottom.
My original parts didn't break, but I thought it would be a nice exercise to re-model the two plastic parts: the nut holding the two halves together as well as the “fader” you push the blade out with (I have honestly no idea how to call…
Simple Stanley Fatmax divider for small shallow bin. Just place it diagonal in the bin to create 2 compartments. Filament tip: Dark yellow PLA+ from eSun. Comes very close to the original bin colour.
I mixed and matched and editted both the outer cups and the inserts as they didnt fully fit with the original cups. I tried to make the top opening in the bottom nested part as small as possible, so the content won't overflow. Bear in…
Simple mount to store your Stanley fatmax v20 batteries Best option is to print with support in the slot area
it's connected to the grinder with a screw on the native mount point best to print with supports
Logos for Empire, Stanley Fatmax, Metabo HPT and GearWrench Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have…
This is a configurable model with (in my honest opinion) a better fit than the original. The fully configurable model is created in OnShape. See this link . Even though there is a configuration available for the height, I don't have a…
// I updated the design with a new version; it has a little “hook” on the back of the lower part, so it doesn't come off easily. You can see the comparison in photo; yellow is new, red is old This is not the most simple hook I ever made…
Bisley hanging file cabinet bracket for 5x Stanley FatMax FMST1-75779 Shallow Organizer I removed the metal hanging file brackets from the drawer. I printed this model 4 times, per drawer, in ABS and mounted using double sided tape…
Stanley FatMax FMST1-75779 Shallow Organizer Dividers for the large and small bins I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Included is the f3d file A lid exists, to prevent small washers to move to another bin.…
A replacement for the Stanley FatMax logo on the FatMax Mobile (113l). This is especially for scuba divers. In Germany it is known as a "Taucherbox" or "Taucherkiste". You have two options: Use the plate and the diver as one and print it…
Stanley FatMax FMST1-75779 Shallow Organizer Lid for the small bins This lid exists, to prevent small washers to move to another bin. I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Print with the top of the lid on the…
Two 49.5mm inserts fit one large compartment One 47mm insert fits into the small ones Added New Version reduced wall material simplified shape
i made this safety cap for my knife because its easier to put the cap on the knife instead of open the knife an put the blade away in the back Category: Tools
Holder for your FatMax tape measure on the Honeycomb storage wall
This is a mount for holding a Stanley Fatmax 9mm snap-off knife (model 0-10-475) on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need only one nut and the M2.5 hardware to attach it. I use an…
Skadis tape measure holder (Stanley Fatmax 8m/26 ft)
Basic holder for Stanley Fatmax Stubby screwdriver FMHT0-62688. Its an easy slip fit from the front, the rubbery overmoulding on the screwdriver provides a bit of resistance. Good for stationary application, probably wouldn't trust it if…
Replacement Bins for DeWalt Shallow Pro Organizers (#DWST14925) or Stanley Fatmax Shallow Pro Organizer (#FMST14920). Compatible and stackable with the existing bins. Files included: Full size standard bin Divided standard bin Optional…
Battery cover for electronic spirit level Stanley Fatmax. Spirit level Stanley Fatmax: POZIOMICA STANLEY® FATMAX® z ELEKTRONICZNYM ODCZYTEM | STANLEY (stanleyworks.pl) After printing, it is worth using a file on the sloping surface of the…
Disclaimer: although this is already a working prototype, it is still a work in progress, mainly improving ease of print. I have more tools than batteries and hate leaving the connections exposed when I throw a tool in the toolbox, so I…
This is a Skadis holder for your Stanley FatMax cutter. I've printed it with Tough PLA.
Adapter to connect a Karcher WD6 vacuum to the Stanley FATMAX FME440 orbital sander.
Simple print and install new part. I printed with at least below settings to get rigid part. 4 layer wall and 60% infill
This was a created to hold the stanley FatMax 25' tape measure on the side of my dewalt table saw there is a second variant which is screw mounted to a wall (I used that on the side of my router table). Basically it's a holder that can…
Simple wall holder for your stanley fatmax 18V battery.
I'm switching from Skadis to HSW and needed this Fatmax cutter holder that I love ! Just removed skadis parts and added a 11.4mm width and 8mm depth hexagon at the back of it. No insert, no hassle, just print and plug !
